top of page
Medium Saddle Metallic 67

CVOA Official Parts For Sale

Here you can view the merchandise offerings of the CVOA.  The continued development and availability is funded by membership dues.   You must be a member in order to purchase these parts.

​

Image
SKU
Description
Price
InStock
CVOA-PT-07
BELT - Distributor drive timing belt.
$25.00
Yes
CVOA-PT-08
BELT - Camshaft drive timing belt.
$135.00
Yes
CVOA-PT-09

Remanufactured using the more durable ball/roller bearing. Price reflects pump price of $225.00 and $100.00 core charge, which will be refunded when rebuildable core is received.  Ship your core to:

     Shawn Parsons

     4571 County Street 2750

     Marlow, OK  73055

To avoid paying the core charge, ship the carefully-packed core to the Merchandise Director with your order.
$325.00
No
CVOA-PT-10
HEATER BOX REBUILD KIT - Reproduction kit with seals. You will also need to get a small tube of 3M Super Weatherstrip Adhesive and some 3M Strip Caulk from your local auto parts store.
$22.00
Yes
CVOA-PT-12
***OUT OF STOCK*** 3M "27" TAPE - The special white insulating tape used on the left engine wiring harness. 7 ft. roll (enough to do one car) 75 or 76. LIMITED SUPPLY
$11.00
Yes
CVOA-PT-13
FUEL INJECTOR MOUNTING KIT - Includes (4) fuel rail grommets, (4) injector to manifold seals, (8) injector o-rings (of which (4) are spares), and instructions.
$11.00
Yes
CVOA-PT-16

HOOD PAD - Exact reproduction. Molded fiberglass with prepunched mounting holes. Retainer clips for hood pad not included. Free Shipping is no longer included for this item.  This item will be a pickup, roundup, or as convinent option.  All shipping suppliers have this package as "oversized" and thus charged.  The last shipping prices for this item was $450.  The Club has lost money on this item since oversize pricing has gone into effect.  

 

                                                          ** N O T E **

IF ORDERING USING THE PROMO CODE AND PICKING UP AT ROUNDUP, PLEASE BE ADVISED.  THERE IS NO BOX OR PACKAGING OTHER THAN THE PLASTIC BACK IT COME IN PROVIDED BY OUR SUPPLIER.  THIS IS A FRAGILE PART AND IS BEST TRANSPORTED FLAT.  

$200.00
Yes
CVOA-PT-19
REAR MAIN SEAL (NEOPRENE) - This seal can be used in place of the rope seal. It is easier for the novice to install, and those who have installed it have had no problems. The "wings" must be cut off with a razor before installation. In addition the rubber side seals and pins from the Rear Main Seal (Rope) Kit can be used to seal the sides of the rear main cap or RTV can be used to seal the sides.  The side seals are not included with this seal.  
$30.00
Yes
CVOA-PT-20

Proper size OEM Lower Hose new mfg by Gates

$45.00
No
CVOA-PT-21

This is the OEM type Rear Main Seal (Rope) Kit.  Includes the rope seals.  It does NOT include the rubber required to seal the sides of the rear bearing cap to the sides of the block.  Permatext may be used in place of the side seals.  This seal is no longer included in the Lower End Gasket Kit.

 
$35.00
Yes
CVOA-PT-22

BRAKE CALIPER HARDWARE - Pins and mounting sleeves used to mount the brake caliper to the spindle. Contains enough parts to service one caliper

$8.00
Yes
CVOA-PT-23

(8) Intake & (8) Exhaust valves, (16) valve guides and (16) valve seals

$425.00
No
CVOA-PT-24

Reproduction gas tank from Tanks Inc.  Genuine reproduction taken from orginal Cosworth Vega gas tank.  The club purchased enough to make sure the project had enough numbers to complete this project.  Painted, tray located in bottom of tank.  Limited numbers, once gone, we will probably not order any more.  

 

Due to the excessive size, shipping is not included in the price.  If shipping anywhere else but Oklahoma, the FEDEX shipping cost is $161.  If you want me to ship it, the total price will be $675.  The price shown is for pickup only.  You can make arrangements for pickup, or if within a reasonable distance, (OKC area) I can meet you.  There maybe some available at the National Roundup, but that is not guaranteed.  If I am going, or someone else is going, arrangements can be made for pickup at the National Roundup.

$515.00
Yes
HEM-ENG-1

Cosworth engines.  NO GUARANTEE ON CONDITION.  In various shapes.   No intake manifold, one with headers attached.  PICK UP/DELIVERY ONLY - NO SHIPPING.  Call to arrange pickup.  Can deliver to Roundup/other member to pass on.

$500.00
Yes
HME-B-2

Cosworth Vega Rims.  Priced Each.  Will fit 1976 Cosworth only.  Uses 76 Cosworth lug nuts.  Can fit 1975 Cosworth, but only using 76 lug nuts.  All need refinishing.  This is the largest item that I can ship at a reasonable price.  If shipping goes up, they maybe pickup/delivery only.

$100.00
No
HME-B-3

Passenger fender.   No rust through.  Maybe some surface rust.  No dents.  Minor scratches.  Pickup/Deliver Only.  No shipping.  I will deliver to someone who can pass it on at Roundup.  

$200.00
Yes
HME-B-4

Regular Vega Steel Rim with Baby Moon hubcaps.  May have 4th in my private stock that I will sell if a set of 4 is needed.  Priced each with hubcap.

$50.00
Yes
HME-B-6

Rear hatchback.  No rust through.  Surface rust present.  Has holes for Louvers above and below glass.  Will not ship.  Pickup/Delivery Only.  Will deliver to roundup to pass on

$200.00
No
HME-E-1

Cosworth Header, some with Air Pulse tubes plugged, some without.  Please indicate if you want one with or without the plugs.

$50.00
Yes
HME-E-1C

Jet Coated Cosworth Vega Header.  Blue.  Only one in stock.

$100.00
No
bottom of page